LPG Series High-speed Centrifugal Spray Drying Machine
for Liquid Technology Shaping and Drying Industry
The drying technology is most suitable for producing solid powder
or particle products from liquid materials, such as: solution,
emulsion, suspension and pump able paste states. For this reason,
when the particle size and distribution of the final products
residual water contents, mass density and the particle shape must
meet the precise standard, spray drying is one of the most desired
|Inlet Temperature (℃)||140-350 automatically controlled|
|Outlet Temperature (℃)||80-90|
|Max. Water Evaporation Capacity (kg / h)||5||25||50||100||150||200-2,000|
|Centrifugal Spraying Nozzle Transmission Mode||compressure air transmission||mechanical transmission|
|Rotation Speed (rpm)||25,000||18,000||18,000||18,000||15,000||8,000-15,000|
|Heat Supply||elcetricity, electricity-steam, fuel oil, gas or settled by user
|Dried Powder Collecting||≥ 95%|
Spray drying is the technology most widely used in the liquid
technology shaping and in the drying industry.
- Plastic Industry and so on
After the air been filtered and heated the air enters into the air
distributor on the top of the dryer. The hot air enters into the drying room in the spiral form and
uniformly. Passing through the high-speed centrifugal sprayer on
the top of the tower, the material liquid will rotate and be
sprayed into the extremely fine mist liquid beads. Through the very short time of contacting the heat air, the
materials can be dried into the final products. The final products
will be discharged continuously from the bottom of the drying tower
and from the cyclones. The waste gas will be discharged from
Flow Chart of LPG Spray Srying Machine:
Enterprise Development Goals: To build national brand based on the world!
Corporate Purposes: Provide customers with high quality products and quality services!
Our Value: Honesty & Integrity, Innovation, to create excellent results,
diversity and to participate in the world.